Workshop

Click to view larger

When selecting new wheels be sure that the width, diameter, offset, P.C.D. (bolt circle diameter), and number of bolt holes are correctly matched. The rim width should match Yokohama's recommended tyre dimension specifications (Available as the downloadable tyre sizing chart from www.yokohama.com.au under each tyre in "our tyres"). P.C.D. and number of bolt holes information can be obtained from measurements off the old wheel. The figure to the right identifies the parts of the wheel.

The offset of the wheel is critical to wheel clearance. If there is insufficient guard (fender-well) clearance, the tyres may touch during cornering. This can result in severe tyre damage. Therefore, be sure to obtain the proper offset of the new wheel.

Ref: Yokohama HPT Technical Service Manual © 1993

Yokohama Wheel Salesman

ADVAN light weight racing wheels are precision-made and valuable. They can not be returned once a tyre is fitted. As a result the right advice and care is needed to determine the best wheels and tyres for each application. Care when fitting is required not to scratch or damage the wheels and tyres. Some high-inch, low-profile tyres with reinforced sidewalls and strong bead areas are difficult to fit and require experience and expertise.

When you submit an enquiry it will be sent to a local ADVAN wheel dealer specifically chosen by Yokohama or to a Yokohama Wheel Salesperson who can advise you on your wheel choice and recommend a competent and professional tyre dealer.

Enquire Now